Xterm Emulator For Windows 10

  1. Xterm Emulator For Windows 10 Iso
  2. Xterm Emulator For Windows 10 Pro

Xvt - X terminal-emulator similar to xterm, but smaller All i want is something that is better than xterm, has Unicode Support (UTF-8) and colour support. And not much more. Rxvt-unicode-256color sound right, but i don't know if it is the best option and if others have the same features. X-Win32 is an X Server which main purpose is to display remote graphical applications. Most modern Unix/Linux systems have an X based terminal emulator included in the X libraries. As such X-Win32 does not include one by default. Here is a list of Terminal Emulators which StarNet recommends: xterm — Basic terminal emulator. Available on most. SSH X-Server for Windows, Secure way to run Linux and Unix on Windows Desktop. This powerful software package provides a cost-effective way to transform your PC into a powerful X-Windows workstation. All that you need for connection is included. XtermSharp is a VT100/Xterm terminal emulator for.NET, the engine is intended to be agnostic from potential front-ends and backends. Consumers use a higher-level implementation that provides integration with their UI toolkit of choice. This module contains both implementation a Cocoa/Mac and a.


A trivial type of terminal emulation is where you set up a realterminal to emulate another brand/model of terminal. To do this youselect the emulation you want (called 'personality' in Wyse jargon)from the terminal's set-up menu. This section will not discuss thiscase.

Since a PC has a screen and keyboard (as does a real terminal) butalso has much more computing power, it's easy to use some of thiscomputing power to make the PC computer behave like a real textterminal. Still a third type is where you just use a text-basedinterface (at the console --usually just the monitor) to your LinuxPC, either by a terminal screen (such as xterm) in Xwindow or by a'virtual terminal'.

To fully emulate a real terminal on a PC requires that a serialport of the computer will be used to connect the emulated terminal toanother computer. This would be either with a direct cable connectionfrom serial port to serial port, or via a modem. But in other cases,the serial port will not be used directly as the interface. Instead,the interface may be a network and the flow of bytes to and from theterminal will travel in network packets via either a modem on a serialport or via an ethernet port.

Emulation for connection to a remote computer provides more that justa real text-terminal since the PC doing the emulation can also doother tasks at the same time it's emulating a terminal. For example,for serial port connections, kermit or zmodem may be run on the PC toenable transfer of files over the serial line (and possibly over thephone line via a modem) to the other computer that you are connectedto. The emulation needs only to be run on one of the virtual consolesof the PC, leaving the other virtual consoles available for using thePC in command-line-interface.

For Linux see Make a Linux PC a serial port terminal. Emulation software for this also available for useunder MS Windows. See Make a non-Linux PC a terminal This can be used to connect a Windows PC (as aText-Terminal) to a Linux PC.

Most Linux free software can only emulate a VT100, VT102, orVT100/ANSI, xterm, pterm, or Wyse60 (but not fully). Since most PC'shave color monitors while VT100 and VT102 were designed for amonochrome monitor, the emulation usually adds color capabilities(including a choice of colors). Sometimes the emulation is not 100%perfect but this usually causes few problems. None of them provideprogrammable function keys. The non-free emulation software runningunder MS Windows can emulate many more terminals than free Linux can.

Some have erroneously thought that they could create an emulatorat a Linux console (monitor) by setting the environment variable TERMto the type of terminal they would like to emulate. This does notwork. The value of TERM only tells an application program whatterminal you are using. This way it doesn't need to interactively askyou this question (and it's too dumb to be able to probe the terminal tofind out what type it is). If you're at a Linux PC monitor (commandline interface) it's a terminal of type 'Linux', and since you can'tchange this, TERM must be set to 'Linux'. But this 'Linux' should beset automatically, without you needing to do anything.

If you set it to something else, you are fibbing to an applicationprogram. As a result, it will incorrectly interpret certain escapesequences from the console resulting in a corrupted interface. Sincethe Linux console behaves almost like a vt100 terminal, it could stillwork almost OK if you falsely claimed it was a vt100 (or some otherterminal which is close to a vt100). In this case it may seeming workOK most of the time but once in a while will give errors.

while the newer free PuTTY and Terra-Term programs can connectdirectly to a serial line but can't dial out, most of of the olderprograms did dialing out via a serial port modem. Some dialingprograms are for making a PPP connection to the Internet via a modem,such as wvdial, and don't normally include any terminal emulation.But some other programs (such as minicom or seyon) do both terminalemulation and modem dialing (without PPP so it's not easy to use themto connect to the internet). But since these programs connect to amodem via a specified serial port (including 'internal' serial portsthat have no connector on the back of the PC), they may be used toconnect to a serial line via a possible serial port connector on theback of a PC. For this case you just set them up to connect withoutdialing a phone number. The program 'picocom' just does terminalemulation although it's possible to type in a modem command and aphone number to dial out manually. These programs are also useful fortesting modems. Seyon is only for use with X Window and can emulateTektronix 4014 terminals. In the past (before the Internet waswidespread) one could use dialing programs to dial up some publiclibraries to use their catalogs and indexes, or even read magazinearticles on line. But today such activity is almost always done usingthe Internet where there is a much larger choice of connections and nolong-distance telephone bills.

The communication program C-Kermit (sometimes just called kermit)doesn't do terminal emulation for Linux (in 2006). But Kermit canemulate many terminals in its non-free MS Windows versions so you`llsee lots of claims that Kermit can do terminal emulation. With Linux,it's merely a semi-transparent pipe between whatever terminal you areon and the remote site you are connected to. Thus if you use kermiton a Linux PC the terminal type will be 'Linux'. If you have a Wyse60connected to your PC and run kermit from that, you will appear as aWyse60 to the remote computer (which may not be able to handle Wyse60terminals). Minicom emulates a VT102 and if you use it on Wyse60terminal vt102 the remote host will think you are a vt102 and send youvt102 escape sequences. These will flow into your computer's serialport and will get translated to the Wyse escape sequences before goingout another serial port on your computer to your Wyse60 terminal.C-Kermit can't do this sort of thing.

Emulators exist under DOS such as telix and procomm workjust as well. The terminal emulated is often the old VT100, VT102, orANSI (like VT100).

Emulation under X Window

There are many terminal emulation programs (such as xterm, uxterm.gnome-terminal, and konsole) which may be run under X Window. They canusually emulate a VT102, but some may be able to emulate at VT220, orTektronix 4014. They provide a command line interface to the computerbut they don't communicate via the serial port like a text terminal.See Ubuntu -- x-terminal-emulator for a brief list of suchemulators. Some are multilingual. Your Linux distribution has likelyinstalled one for you.

Real terminals once were better

Unless one was using X Window with a large display, a realterminal was often nicer to use than emulating one. It often hadbetter resolution for text (since it's monochrome), and had no diskdrives to make annoying noises. Today, the resolution of modern colordisplays is better than that of the old text-terminals and disk drivesare quieter.

For the VT series terminals there is a test program: vttestto help determine if a terminal behaves correctly like a vt53, vt100,vt102, vt220, vt320, vt420 etc. There is no documentation but it hasmenus and is easy to use. To compile it run the configure script andthen type 'make'. It may be downloaded from: http://www.ibiblio.org/pub/Linux/utils/console/

The console for a PC Linux system is normally the computer monitorin text mode. It emulates a terminal of type 'Linux' and the escapesequences it uses are in the man page: console_codes. There is no wayto make this interface emulate anything else. But of course you can runemulation software on your PC so that the monitor and keyboard willemulate a text terminal while that software program is running.Setting the TERM environment variable to any type of terminal otherthan 'Linux' will not result in emulating that other terminal. Itwill only result in a corrupted interface since you have falselydeclared (via the TERM variable) that your 'terminal' is of a typedifferent from what it actually is: Linux. See Don't Use TERM For Emulation

Xterm Emulator For Windows 10

In X Window, using a terminal emulator gives you the equivalent of aconsole. For KDE they chose to call this emulation 'konsole'.In some cases, the console for a Linux PC is a text-terminal. One mayrecompile Linux to make a terminal receive most of the messages whichnormally go to the console. See Make a Serial Terminal the Console.

The 'Linux' emulation of the monitor is flexible and has featureswhich go well beyond those of the vt102 terminal which it was intendedto emulate. These include the ability to use custom fonts and easilyre-map the keyboard. These extra features reside in the consoledriver software (including the keyboard driver). The console driveronly works for the monitor and will not work for a real terminal evenif it's being used for the console. Thus the 'console driver' isreally a 'monitor driver'. In the early days of Linux one couldn'tuse a real terminal as the console so 'monitor' and 'console' wereonce always the same thing.

The stty commands work for the monitor-console just like it was a realterminal. They are handled by the same terminal driver that is usedfor real terminals. Bytes headed for the screen first go thru theterminal (tty) driver and then thru the console driver. For the monitorsome of the stty commands don't do anything (such as setting the baud rate).You may set the monitor baud rate to any allowed value (such as a slow300 speed) but the actual speed of putting text on the monitor screenwill not actually change. The file /etc/ioctl.save stores sttysettings for use only when the console is in single user mode (but youare normally in multiuser-user mode). This is explained (a little) in theinit man page.

Many commands exist to utilize the added features provided by theconsole-monitor driver. Real terminals, which use neither scan codesnor VGA cards, unfortunately can't use these features. To find outmore about the console see the Keyboard-and-Console-HOWTO. Also seethe various man pages about the console (type 'man -k console').Unfortunately, much of this documentation is outdated.

Since there are free programs to emulate the most commonterminals, you will unlikely need to use any non-free software. Butif you need to purchase software you should try to throughly check outwhat other customers have to say about it.

Make a Linux PC a serial port terminal

Unless you want to emulate the standard vt100(or close to it), xterm, or a Wyse 60, there doesn't seem to be muchfree terminal emulation software available for Linux. The freeprograms are minicom, picocom, and for GUI: seyon and PuTTY. Seyoncan emulate either xterm or vt100 while PuTTy uses its own termcap(terminfo) named 'putty' (put the terminal type 'putty' in/etc/inittab). Putty's 'pterm' can be used as a replacement forxterm.

PuTTY is much newer than most other emulations and a major use of itis as an SSH client but you can set its configuration for a serialport connection. Seyon is much older but with more features (some ofwhich are seldom needed). There are also more recent (but weaker)'emulators' for a GUI interface: gtkterm and cutecom, neither of whichcan emulate any terminal except of type 'dumb' ??). Seyon can alsoemulate a Tektronix 4014 terminal. For Wyse see Wyse 60 emulator.

Both gtkterm (and likely cutecom) don't use escape sequences, andmight be said to emulate a terminal of type 'dumb' so they would bequite slow if used as a text terminal for editing files on the hostcomputer using the vim editor, etc. gtkterm is simple to set up andvery weak in capabilities but it does show its current status at thebottom of the screen.

Minicom, PuTTY, picocom, gtkterm, or cutecom may be used to emulate adirectly connected terminal by simply starting one of them. Forminicom, you must configure it for the serial port used). Picocom islike a mini-minicom and doesn't have automatic dialout capability.Gtkterm might be called a 'mini-mini-minicom'.

Minicom : For the case of minicom you obviously don't try to dial-out.When you want to quit minicom (after you logout from the other PC) youuse minicom's q command to quit without reset since there is no modemto reset. When minicom starts, it automatically sends out a modeminit string to the serial port. But since there's no modem there, thestring gets put after the 'login:' prompt. If this string is mostlycapital letters, the getty program (which runs login) at the other PCmay think that your terminal has only capital letters and try to useonly capital letters. To avoid this, configure the modem init stringssent by minicom to null (erase the init strings).

The non-free terminal emulator 'Procomm' (which is from the MS world),can be used on a Linux PC if you run dosemu to emulate Dos or possiblyin a mode emulating MS Windows. The last version of it seems to be4.8 released in around 2000 so it will likely not work with modern MSsystems. It was sold by Symantec which has many files supporting itwhich may be found using their search engine at http://www.symantec.com/. And if you check the Internet (in2008), it's still being sold here and there.

There was a specialized Linux distribution: Serial Terminal Linux. Itwould turn a PC to into a minicom-like terminal. It's small (fits on afloppy) and will not let you use the PC for any other purpose (when it'srunning). The link to it is broken, but one similar to it (in 2013),but on CD, is ASASHI DOT NET: PITUX, micro SERIAL TERMINAL LINUX

TERM (non-free commercial software from Century Software) Terminal Emulator can emulate Wyse60, 50; VT 220, 102, 100,52: TV950, 925, 912; PCTERM; ANSI; IBM3101; ADM-1l; WANG 2110. Blockmode is available for IBM and Wyse. It runs on a Linux PC.

Make a Linux PC an IBM network terminal

This happens automatically when you run programs like telnet orssh, provided of course that your computer is connected to a network(perhaps via a modem). Telnet normally uses a network (often theInternet) to connect your console, which emulates a terminal of type'Linux', to a remote computer for you to log in to. However, thereare some free programs that allow you to use telnet with IBM terminalemulation on your PC to connect with IBM mainframes.

One IBM program emulates an IBM tn5250 terminal and printer andanother emulates an IBM c3270. There's also one that emulates an IBMpr3287 printer (the mainframe thinks it's connected to the printer).The Debian distribution has these. It's reported that the tn5250emulates a vt keyboard under Linux and not a 5250 keyboard like itshould. Also, it's reported that the documentation and keyboardmapping for the MS Windows version are better than for the Linuxversion.

Make a non-Linux PC a terminal

Emulators exist which run on non-Linux PCs. They permit you touse a non-Linux-PC as a terminal to connected to a Linux-PC. Under DOSthere were many programs that not only emulated a terminal but let youdial out with a modem so that you could connect to other computersover telephone lines (without getting connected to the Internet). Ofhistorical interest is an article in Byte magazine from Feb 1994entitled 'DOS Serial Communications. It was onetime athttp://www.byte.com/art/9402/sec8/art1.htm.

Today Windows comes with 'HyperTerminal' (formerly simply called'Terminal' in Windows 3.x and DOS). Competing with this is both thefree (open source) PuTTY and the non-free 'HyperTerminal PrivateEdition' http://www.hilgraeve.com/htpe/index.html which isnon-free to business. It can emulate vt-220. PuTTY emulates xterm andsupposedly also vt-102 but it doesn't have file transfer capabilities(such as zmodem) like HyperTerminal does. But PuTTY permits a displaywith a height of over 24 lines (set the Linux shell variable LINES tosay 32 by typing: LINES=32). Turbosoft's TTWin (non-free) can emulateover 80 different terminals under Windows. See http://www.ttwin.com/ or http://www.turbosoft.com.au/ (Australia). See also WRQ

For using a Mac computer to emulate a common terminal use eitherPuTTY, Linux's 'minicom' (ported to the Mac OS X) or the old 'zterm'(shareware). For very old Macs prior to OS X, see the mini-howto:Mac-Terminal. Carnation Software has non-free software to emulate a widevariety of terminals on a Mac. Mac OS X has a 'terminal' program thatgives you a terminal window just like the xterm window in Linux's XWindow. In that window you may run 'minicom' (if it's available).Both the 'fink' and 'darwinports' projects have ported minicom to theMac, but they may not have the most recent version and you might needto compile minicom yourself.

Since displays used for text terminal emulation are almost alwayscolor displays, you can utilize color coding of words. Besidesdisplaying directories this way (See Example for ls Function) some other Linux programs display color-coded text.It seems to mostly happen without any configuring but there may becolor conflicts. For example, if you have set the background colorgreen, then if a programs sends you green text, it will be difficultor impossible to read.

Color usually works by programs sending ANSI escape sequences to theterminal. One might think that an emulated terminal would show theANSI escape codes in the terminfo.for the terminal. But this is not usually the case since if a terminalsupport colors it seems to be assumed that these color will be sent tothe terminal using the ANSI encoding.

If you want to see what these encodings are, look at 'manconsole_codes'. The ECMA-48 color codes in this man page appear to bea subset of the ANSI color codes. For excruciating details see ANSI escape code - Wikipedia. Note that these ANSI codes cover more than justcolors.

For PuTTY one can select the precise color to display for every ANSIcode by using the settings menu and clicking on 'Colours'. Forexample if you have your screen background light green, then you canremap that ANSI color to some shade of brown that you select. Notethat light green is called 'Green Bold'. It's bold because itcontains a lot of white which makes it a light color.


You might sometimes need to run a few of the major Linux utilities on your windows system that are not present in a windows system. In that case, you probably need a virtual machine which can help you run all such Linux application, software, and utilities without even disturbing or making any changes to your windows system. The Linux emulator for windows is such a virtual machine that can help you run Linux on windows side by side. There is a wide range of Linux emulators available for windows. Here we are sharing top Linux emulators online that can help you work on Linux with windows.



Cygwin gives you a simple and powerful way to run your major Linux applications on a windows system. With this Linux emulator, you can make native windows apps aware of Linux functionality and thus while running Linux functions on windows you will have a Linux native system feeling. Get downloaded online.

Cooperative Linux

Cooperative Linux is a free and open source Linux emulator for windows that lets you run your Linux applications on windows natively. With this emulator, you can run Linux applications on windows 2000, XP, Vista and 7 without using any commercial PC virtualization software. It is also referred as coLinux. Available online for download.


Winehq is basically a compatibility layer rather than an emulator which lets you run windows applications on Linux system. In addition to Linux, it helps you in running windows apps on Mac OSX, BSD, and more POSIX compliant operating systems. It translates windows API calls to POSIX calls thus cleanly integrating applications into your desktop.

Linux Emulator for Windows

Download this Linux emulator for windows and run your major Linux applications on windows systems. This is an open source program that runs in a user mode. It emulates Linux system calls on an open source layer and thus ports Linux programs under windows. So just get this wonderful software downloaded for your windows system.


Xshell is a powerful terminal emulator that works wonderfully in making major Linux apps native or known to windows systems. It supports SSH, TELNET, RLOGIN, SFTP, and SERIAL. Its various features include tabbed environment, custom key mapping, dynamic port forwarding, user defined buttons, VB scripting and more. Get downloaded online.


ZOC is a professional and powerful SSH/telnet client and terminal emulator that is compatible with windows 10 and OS X El Capitan. This emulator makes it quite simple to access hosts and mainframes via telnet, secure shell, serial cable, modem and more. Thus you can comfortably run your Linux applications on your windows system using this software.

Indigo Terminal Emulator

Indigo Terminal Emulator is one of the top and premier terminal emulator software for windows systems. This helps to emulate Linux applications and make them run in windows. This software enables communication between the serial terminal and telnet. It is supported by windows XP, vista, 7, windows 2003 server and more.

Espxe – Most Popular Software

Epsxe is one of the most popular and powerful Linux emulators for windows that lets you enjoy major Linux applications and utilities on your windows system with the same features, speed and feeling that you would have on a Linux system. With this system, there would not be any changes in your windows programs their speed and all.

Xterm Emulator For Windows 10 Iso

What is Linux Emulator for Windows?

No matter how advanced popular operating system we are running, we may often need several applications like games or software from old operating system to be run on our windows system. It doesn’t make sense to keep a different system with Linux operating system to just run such applications. You can also see IOS Emulator for Windows

So Linux emulators have been developed to help your windows system communicate with Linux applications and make them run on your windows system. These systems do not cause any harm to your current applications of your windows systems. So find suitable Linux emulator for windows free download and enjoy your Linux applications on a windows system.

You can find the suitable Linux emulator online from the above list we have provided and can easily make your Linux applications run on your windows system. All these software are tested and trusted by millions of people around the world and thus are secure and reliable enough to try on any of your windows systems.

Xterm Emulator For Windows 10 Pro

Related Posts